Hydraulic Repair Services in Collingwood

Custom Hose Assembly • Cylinder Rebuilds • System Diagnostics

When hydraulic failure brings your operation to a halt, we get you back running fast with expert hydraulic repair services.

Custom Hoses Made In-Shop

We crimp hydraulic hoses on-site while you wait. Bring your old hose or measurements – we’ll match it.

Cylinder Rebuilds

Why replace when you can rebuild? We reseal leaking cylinders at a fraction of replacement cost.

Fast Turnaround

Most hydraulic hose assemblies completed same-day. Cylinder rebuilds typically 2-3 business days.

Custom Hydraulic Hose Assembly

Hydraulic hose failure never happens at a convenient time. That’s why we stock a full range of hoses, fittings, and adapters to make custom assemblies on the spot.

What We Stock:

Hose Types:

  • Low, medium, and high-pressure hydraulic hose
  • 1-wire, 2-wire, and 4-wire construction
  • Sizes from 1/4″ to 1″ diameter
  • SAE 100R1, 100R2, and specialty hoses

Fittings & Adapters:

  • JIC (37° flare)
  • NPT (National Pipe Thread)
  • ORFS (O-ring Face Seal)
  • Metric fittings
  • Quick disconnects
  • 90° and 45° elbows

How It Works:

  1. Bring Your Old Hose Or provide measurements if you don’t have the failed hose.
  2. We Match Specs Pressure rating, diameter, length, and fitting types.
  3. Crimp While You Wait Most hoses completed in 15-30 minutes.
  4. Test Before You Leave We verify crimp integrity and fitting seating.

No hose to match? We can help you identify the correct specifications for your equipment.

Hydraulic Cylinder Rebuilds

Leaking cylinder costing you time and money?

Before you spend hundreds or thousands on a replacement cylinder, consider a rebuild. We disassemble, inspect, reseal, and test cylinders for a fraction of replacement cost.

Our Rebuild Process:

  1. Disassembly & Inspection We break down the cylinder and measure all components for wear.
  2. Cleaning Thorough cleaning of barrel, rod, and components.
  3. Seal Replacement New seals, O-rings, and wear bands installed.
  4. Rod Repair (if needed) Chrome re-plating or polishing for scored or pitted rods.
  5. Reassembly Torqued to spec with proper lubrication.
  6. Pressure Testing Full pressure test to ensure no leaks.

What We Rebuild:

✓ Loader cylinders ✓ Plow lift cylinders ✓ Backhoe and excavator cylinders ✓ Implement cylinders ✓ Dump truck cylinders ✓ Custom and specialty cylinders

Typical turnaround: 2-3 business days for standard rebuilds

Hydraulic System Diagnostics

Hydraulic problems can be tricky to diagnose. Is it the pump? A valve? Contaminated fluid? We have the tools and experience to find the issue.

We Diagnose & Repair:

  • Low pressure or flow problems
  • Slow operation
  • Erratic or jerky movement
  • Overheating systems
  • Noisy pumps or motors
  • Contaminated fluid issues
  • Valve problems

We service hydraulic systems on:

  • Snow plows
  • Tractors and loaders
  • Skid steers and excavators
  • Dump trucks and trailers
  • Wood splitters
  • Industrial machinery

Why Rebuild Instead of Replace?

Cylinder rebuilds typically cost 60-75% less than buying new replacements.

Plus, rebuilds often outlast cheap replacement cylinders because we use quality seal kits and proper procedures.

Prevent Hydraulic Failures

Most hydraulic failures are preventable with proper maintenance:

✓ Regular fluid changes ✓ Filter replacement ✓ System flushing ✓ Leak inspection ✓ Hose inspection (replace before failure)

Ask about hydraulic system maintenance when you call.

Hydraulic System Down?

Call for Fast Service

(705) 888-0550
Monday–Friday: 8 AM – 5 PM Saturday: 9 AM – 1 PM

Request Service Online

Tell us about your hydraulic issue and we’ll respond within 24 hours.
Request a Service

Free pickup and delivery within 30km for equipment needing hydraulic service.

453 Hume St, Collingwood, ON L9Y 3Z1

Main Menu